Materials:
SFSP’s metal framing channel manufactured from:
– Hot rolled steel S235JR as per EN 10025 / ASTM A-1011 CS Type B (formerly ASTM A569 or ASTM A570)
– Cold rolled steel DC01 as per EN 10130 / ASTM A1008 CS Type B (formerly ASTM A-366) and then: Hot- dip galvanized as per BS EN 1461 (formerly BS 729) / ASTM A123 or Electro plated as per EN 12329 / ASTM B633 (Electrodeposited coatings of zinc on iron and steel)
– Pre-galvanized steel DX51 D+Z as per EN 10346 (G180 and G275 is available upon special request) which supersedes EN 10327 which is a replacement of EN 10142 which in turn supersedes BS 2989 / ASTM A653M zinc coated (hot-dip galvanized) iron and steel CS (commercial) or SS (structural) quality G60 and G90 is available upon special request (formerly ASTM A527M) / ASTM A924 (coating) (formerly A525)
– Stainless steel 1.4301 as per EN 10088-2 (formerly BS 1449 Part 2 / ASTM A240M, Grade AISI 304)
Applications:
– Metal Framing / Electrical Applications
– Pipe & Conduit Supports
– Tunnel Pipe Stanchions
– Beam Attachments
– Pipe Risers
Channel
Cable management support channel is cold formed on modern rolling machines from low carbon steel manufactured.
Lengths
– Standard length: 3000mm with ± 3.2mm length tolerance.
– Custom lengths are available upon request.
Finishes
Standard Finishes:
Standard Finishes: Pre-Galvanized finish (ASTM A653M coating G90 and G60). Hot Dip Galvanized after fabrication (ASTM A123 or BSEN ISO1461:2009). Other custom coatings are available upon request.
I – Support
U – Support
Wall Bracket
PT PLAIN TYPE
| Part No | Thick. mm. | Height “H” |
|---|---|---|
| CCH-220 | 1.5 | 21 |
| CCH-240 | 1.5 | 41 |
| CCH-260 | 1.5 | 25 |
| CCH-320 | 2 | 21 |
| CCH-340 | 2 | 41 |
| CCH-360 | 2 | 25 |
| CCH-420 | 2.5 | 21 |
| CCH-440 | 2.5 | 41 |
| CCH-460 | 2.5 | 25 |
ST SLOTTED TYPE
| Part No | Thick. mm. | Height “H” |
|---|---|---|
| CCH-221 | 1.5 | 21 |
| CCH-241 | 1.5 | 41 |
| CCH-261 | 1.5 | 25 |
| CCH-321 | 2 | 21 |
| CCH-341 | 2 | 41 |
| CCH-361 | 2 | 25 |
| CCH-421 | 2.5 | 21 |
| CCH-441 | 2.5 | 41 |
| CCH-461 | 2.5 | 25 |
B2B TYPE
| Part No | Thick. mm. | Height “H” |
|---|---|---|
| CCH-222 | 1.5 | 42 |
| CCH-242 | 1.5 | 82 |
| CCH-262 | 1.5 | 50 |
| CCH-322 | 2 | 42 |
| CCH-342 | 2 | 82 |
| CCH-362 | 2 | 50 |
| CCH-422 | 2.5 | 42 |
| CCH-442 | 2.5 | 82 |
| CCH-462 | 2.5 | 50 |
B2B TYPE
CCH-320T/321T (41x21x2.0)
CCH-340T/341T (41x41x2.0)
CCH-320T/321T (41x21x2.5)
CCH-340T/341T (41x41x2.5)
Thickness: 2.0 mm or 2.5 mm
Standard Length: 3.00 m
Finishes: Pre-Galvanized, Hot Dip Galvanized
Cantilever Arm Bracket – SCA
Cantilever Arm Bracket B2B – SCA
